B & S INVERTER 6500 WATT GENERATOR

This LED Light Stand offers amazing bright light from a single location. The sturdy, free-standing, telescopic light stand offers tremendous lighting flexibility with easy mobility and takes less than 2 minutes to assemble. Two state-of-the-art 24 Watt LED fixtures generate a pure white light (5000k) equal to 400+ Watts halogen, mounted on a horizontal cross bar are individually adjustable with 140 degrees tilt and 360 degrees rotation •Samsung SMD LED •Voltage: 120/240V •3200 Luminaries •Color temperature of 4500K +-5% •2-24W LED fixtures attach to metal T-box, with inlet plug inserted into T-box •Pole is telescopic with range of 4' to 8' •Pole is aluminum with 3 sections and 2 clamps •Pole screws into 300mm steel base •Base is laser cut and powder coated for durable finish •Notch in base allows light stand to fit around drape pole at front of booth •Powder coated chrome silver finish •LED light head and base shipped in 20"x12"x6" box

Banjo is recognized as the industry standard for convention drape because of its low cost and flame resistant characteristics. Per Foot Charges Only - Final Cost Estimates will be Determined During Reservation. Available in multiple colours, including: Black, Blue, Charcoal, Dark Green, Dusty Rose, Expo Blue, French Blue, Light Grey, Millenia Gold, Orange, Red, Royal Blue, Silver, White. Note: Banjo Drape is not block out drape and will allow some direct light through.

This product is mainly used for decoration and highlight in building frame, garden, etc. It can work in independent mode and DMX mode, which can generate various color changing effects, such as flashing, fading, steady ,seven color jumping synchronously etc. STRUCTURE AND SPECIFICATION Size: L 9" X W 13" * H 9" H Weight: 3.9 KG Rotary angle: 180 degrees TECHNICAL PARAMETERS Input Voltage: 100V-256V AC Operating Temperature: -40C to 60C FUNCTION Colors: Red, Green, Yellow, Blue, Purple, Cyan, White Programs: One Color Flash, Seven Color Fading, Seven Color Flashing LED WALL WASHER INSTRUCTIONS

This Item is Priced by the Square Foot. Each tile is 18"x18" or 2.25 square feet per tile. For example a 12'x12' floor will be comprised of 64 tiles. Standard edging will work with this tile. This tile will not link evenly with standard tile sizes. If edging is required on all 4 sides, each side must be divisible by 3 for edge pieces to fit correctly. Find out how to properly setup your flooring with our Snaplock Flooring Instructions